This is the same set-up i am going to run. You will need a SAE #3 bellhousing and as far as i know a clutch set-up from a F-750 will work as well. Here is a link of a guy that put a 3053a behind his cummins in his 1 ton dodge truck.
http://www.dieseltruckresource.com/d...t=92060&page=2
Here is another link from JP magazine of them installing a 3053a in a 715 behind a SBC, they also have most of the part numbers from NAPA that you will need.
http://www.jpmagazine.com/techarticl...ion/index.html
This guy has 3053a's that are take out's for $350. He can also get you a flywheel and clutches. He will assist on shipping as well.
jepcolwell@aol.com