M715 Zone

M715 Zone (http://www.m715zone.com/vb/index.php)
-   Modified Tech (http://www.m715zone.com/vb/forumdisplay.php?f=35)
-   -   1967 Kaiser Jeep M-715 6BT Build (http://www.m715zone.com/vb/showthread.php?t=27844)

venominjected November 29th, 2015 04:52 PM

1967 Kaiser Jeep M-715 6BT Build
 
Alright guys... time to start the build thread on this one..... heres the lowdown end goal and of parts I already have....

End goal: Somewhat stock appearing M-715 (no huge tires sorry, no spring-over axle, no crazyiness unfortunately).... Daily driven capable.... steers and stops like a modern 1-ton... with just a few too many leafs. (Hence why the m715 is known also as a 5/4 ton). Motor will stay OEM power wise... (as I have a baby 11" clutch)

1991.5 Cummins 5.9L 6BT (VE Rotary)
1993 Ford ZF S542 5 Speed Transmission
Married Ford Np205.. which will be twin sticked and also have my original m715 NP200 E-brake drum housing machined to fit the new NP205.

Ford Dana 60 HP King Pin Front Axle (1988 F350)
Ford Sterling 10.25 Rear Axle (1988 F350)
Disc brakes in all 4 corners (sterling disc conversion)
Hydroboost off of a 2010+ F250/350

Enjoy the ride!

Night I got it home off the transporter from Grand Rapids, MN...
https://i.imgur.com/ENHiw1K.jpg

Back to my home base in my own shop
https://i.imgur.com/bF10rt4.jpg

Broken down and the hard top off and windshield hinged down
https://i.imgur.com/Ua5ilUi.jpg

OEM Dash
https://i.imgur.com/JtYSD0Q.jpg

Prestine bed and all the correct bumperettes and shackles
https://i.imgur.com/8d4UFsd.jpg

Non-numbers matching jeep tornado 230 (oem equipment)
https://i.imgur.com/IVKsLPk.jpg

Its replacement... 1991.5 Cummins VE
https://i.imgur.com/pRnxQqg.jpg

Disassemble Time
https://i.imgur.com/pyO6pIS.jpg

venominjected November 29th, 2015 04:53 PM

A little more intro

Ford SBF Adapter Setup
https://i.imgur.com/d7oqwEp.jpg

Ford Married NP205
https://i.imgur.com/8ts4XPA.jpg

Ford ZF S542 Speed OD
https://i.imgur.com/W5JPNuP.jpg

Bare bones Part 1
https://i.imgur.com/n6Npkq1.jpg

Back from the steam wash bay
https://i.imgur.com/BEjBljG.jpg


Time to start putting things back together
https://i.imgur.com/uTVCeEC.jpg

Of course... nice to sprinkle some tech in there too.... CAD of course !
https://i.imgur.com/64n02Lx.jpg

https://i.imgur.com/tjnzMtQ.jpg

venominjected November 29th, 2015 04:54 PM

A little more intro part II



Dash Concept in CAD
https://i.imgur.com/KRsUvGS.jpg

Flingarrows November 29th, 2015 05:17 PM

Keep it coming venom!

osok December 5th, 2015 05:54 PM

Are you planning a cross member under the 6bt? Looking forward to your progress!

venominjected December 6th, 2015 07:05 AM

Quote:

Originally Posted by osok (Post 255417)
Are you planning a cross member under the 6bt? Looking forward to your progress!

No.... OEM frames are strong enough if your not rock bouncing them... *MOST* guys who put in 6BT's do not.... if I was upping the power from OEM (which I'm not) and had a transmission that could take it... I would indeed brace the frame underneath.

Since I'm remaining stock in my engine, and my ford ZF transmission only has an 11" clutch.... frame spreading will not be of any concern...

osok December 6th, 2015 03:37 PM

I am also interested in your plumbing of the hydroboost to cummins PS pump and what steering box you are going with. I have a similar set up with a FSJ box that I am hoping will have enough flow to turn 39's. I am holding off on the crossmember until I notice a problem, thanks for the input.

venominjected December 12th, 2015 12:01 PM

Out with the old... in with the "new" front axle

Old 5.86 ratio closed knuckle dana 60 with drums.... in with the new King Pin, High-Pinion Ford F350 Dana 60 with discs....

https://i.imgur.com/vYo9feH.jpg

The Sterling 10.25 Rear as I bought it....
https://i.imgur.com/kmgbVT2.jpg

Got me a Kingpin 60
https://i.imgur.com/3imPKcP.jpg

Sneaking it in....
https://i.imgur.com/uTVCeEC.jpg

md1970 December 12th, 2015 03:06 PM

why didn't you sterilize the new axle of all the old brackets and mounts before you put it inder the m715 ?

osok December 12th, 2015 05:27 PM

drivers side front diff will make routing your exhaust easier with the 6bt.

Looking good, keep the pics coming!


All times are GMT -7. The time now is 01:55 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
1998 - 2019