Originally Posted by Hammer
You can put a Ford, or Jeep, T18 in the stock location, but the frame perches for the motor mounts must be moved back some. Basically I moved it back so that the rear frame perch mounting holes in the frame are now going through the front mounting holes on the new FSJ frame perches. So I ended up moving the perches back about 4" or so in total.
This puts the engine relatively close to the firewall, but it looks like about the same distance that the V8 in my cherokee has.
Also, if you bolt in the ford or jeep T18, it lines up the shifter, and everything else, perfectly.