-
Front & Rear axles
Gang, I found an 83 Ford Ambulance with Dana 70 HD dually axles. 4.10 ratio.
Dana 60 with the dually adapters. I have read some posts and am still a little fuzzy on whether these are bolt no’s to the 68’ M715. $300 a piece from the local salvage yard. Yeah or nay? Thanks guys
-
Go read the post on M715 zone...
Tons of info there.
The rear may bolt in. That front axle should be a spring over, so change’s will have to be made.
Just get a tape measure and start checking dimensions
Sent from my iPhone using Tapatalk
-
-
I used a dodge D-60 in rear. Had to relocate the spring perches. Used an F350 D-60 front axle. Was close to bolt in but, it’s spring over so I flipped the rear shackles to make it sit level.
Sent from my iPhone using Tapatalk
-
Shoot, my local yard have tons of those. I am very lucky, I have one of the best junk yards certainly in the Midwest 20 minutes from me. They have literally everything.
-
That's pretty cheap for a Dana 60 front. The front should be fairly close to bolt in if you do a spring over. Rear might need disc brake conversion depending on how wide it is.
-
Swinging by tomorrow and putting a tape on them. Thanks!