-
wiring is moving along ok. Ran into a circuitry issue that I am bugging Barrman about but...
Blending the American Autowire harness to the military 3 lever switch and the T/S switch wasn't too bad. Between the wiring schematics I got here on The Zone and the diagrams provided by American Autowire it's just confirm the pin location and splice it in.
Before looming everything I'm adding wiring for in-cab winch controls (Both front and rear) and throwing in a few extras for future lighting or as spares.
-
I’m shopping for electrical bulkhead connectors for where the wiring passes thru the firewall. My goal is a water tight cab. You know... HOUSTON... Flooding...
Anyway, I’ve been working on the fuel tank.
I got the fuel pump unit and tank level sender installed after POR15-ing the tank. Degreaser, etching then coating.
Got the wiring loomed and run to the rear then hung the tank.
https://uploads.tapatalk-cdn.com/201...a29bd35bea.jpghttps://uploads.tapatalk-cdn.com/201...1ece921935.jpghttps://uploads.tapatalk-cdn.com/201...7929b5b6f8.jpg
Sent from my iPhone using Tapatalk