View Single Post
Old February 4th, 2011, 10:28 AM
white433's Avatar
white433 white433 is offline
Private 1st Class
Join Date: Dec 2006
Location: Paron, Arkansas
Posts: 311
white433 is a Soldier

Chicklin's post about the Napa #9025 and 9026 cylinders not fitting the stock rubber brake lines is correct. Use Napa flex-hose part #36791 for the fronts, and Napa part #36801 for the rear. You will need two reducer fittings at the rear tee, and grind a little part of the fitting to go through the holder tabs, but that way you can replace all the flex-hoses with Napa parts. I finished-up the brakes on my short-truck. All new master cylinder, wheel cylinders, flex-lines and all new steel lines from Napa parts.
Reply With Quote