Results 1 to 6 of 6

Thread: mikec3820 : need to know wheel bearings

  1. #1

    Default mikec3820 : need to know wheel bearings

    need to know wheel bearings
    Post by mikec3820 on Apr 10, 2006, 5:12pm

    Do any of you fine folk know what size the nuts holding the wheel hub on the spindle (front passenger) are so I can get a socket to fit them. Also, My bearings are fried and I am not sure of a part #. Anybody know if the local parts house would have them.

  2. #2
    Join Date
    Dec 2003
    Location
    Lone Pine, CA
    Posts
    451

    Default luckypabst :

    Re: need to know wheel bearings
    Post by luckypabst on Apr 10, 2006, 7:14pm

    I thought I had the bearing and race numbers in my notes but I guess not. They are common parts, just take in the number off the bearing and the number from the race.

    Front wheel grease seals are Nat'l #475384, about $20 each.

    I wanna say the nut is 2-9/16". Best to measure yours if nobody chimes in.

    Chris

  3. #3

    Default mikec3820 :

    Re: need to know wheel bearings
    Post by mikec3820 on Apr 11, 2006, 5:37am

    Thank you. I'll try to get a part number off the bearings, but one of them completely desentigrated going down the road.

  4. #4
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default brute4c :

    Re: need to know wheel bearings
    Post by brute4c on Apr 11, 2006, 9:06am

    I think these are correct...

    Outer-Timken #18790 Rated @2950 lbs.
    Cup #18720
    Inner-Timken #387A Rated @4900 lbs.
    Cup #382A

  5. #5

    Default mikec3820 :

    Re: need to know wheel bearings
    Post by mikec3820 on Apr 11, 2006, 7:52pm

    Thank you. I'll call right now and see if they are in stock here. I suppose i will disect the front spindle and hub this weekend.

  6. #6
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default brute4c :

    Re: need to know wheel bearings
    Post by brute4c on Apr 11, 2006, 9:50pm

    I have a hub socket...its iss 2 9/16ths inch...

Similar Threads

  1. 230 rod bearings
    By SR. in forum Modified Tech
    Replies: 6
    Last Post: March 12th, 2010, 03:32 AM
  2. uscgmatt : Rear axle wheel bearings.
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 9
    Last Post: November 11th, 2009, 12:02 AM
  3. Connecting Rod Bearings
    By rboltz in forum Stock Tech
    Replies: 7
    Last Post: February 12th, 2009, 02:29 AM
  4. NAPA part numbers for front and rear wheel bearings?
    By maddawg308 in forum Open Discussion
    Replies: 13
    Last Post: January 5th, 2008, 11:33 AM
  5. rear wheel bearings
    By terryb in forum Stock Tech
    Replies: 2
    Last Post: March 6th, 2007, 07:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024