Results 1 to 4 of 4

Thread: Transfer case info wanted

  1. #1

    Default

    I have a 205 and a 203 from a Chevy 350 turbo(27 splines). I could buy a doubler kit to bolt them together but how could I use the 203 divorced with my stock tranny. Can it even be done? I mean, using a married tcase in a divorced fashion?
    Mine just keeps getting taken further apart.

    Maybe it\'s all the beer.

  2. #2
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    If your question was, can a non-divorce t-case be used as a divorced case then the answer is not without making the following.

    input yoke
    input yoke retaining nut/bolt
    input bearing housing
    input bearing
    input bearing seal

    There is probably a few other things, but I can't think of them right now. If that was not your question, then I am lost.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  3. #3

    Default

    yeah, you're on it... I'm just wodering how I could attach a yoke to a tcase that was originally married. Is this common? Are there conversion kits out there to change the input shaft?.... I was looking at the bearing retainers that bolt to the NP200 and I wondered why I couldn't just drill and tap the 203 to accept the retainer, get a longer shaft that would accept a yoke and wha laa.
    Or do I need a degree in engineering and a metal lathe/CNC/etc. ?
    Mine just keeps getting taken further apart.

    Maybe it\'s all the beer.

  4. #4
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    I think the yoke part of it is the easiest. Somewhere out in the world is a junkyard with one that will fit. Bolting it on is another story. So is oil sealing and shaft support bearings. Don't forget that the tranny output bearing is basically carrying the load of the input shaft on a married t-case. The divorced one is on it own. I will throw two more idea at you. Modify a trans output housing to fit and use a slip yoke. Advance Adaptors has their own t-case. It can be used married or divorced. They either have a bearing in the case housing, most likely, or their input housing has it. If it is the housing, then it will probably be able to fit your case.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

Similar Threads

  1. transfer case ?
    By d4colombo in forum Modified Tech
    Replies: 31
    Last Post: September 11th, 2012, 10:01 AM
  2. ron : NP{200 Transfer Case
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 7
    Last Post: November 11th, 2009, 06:04 AM
  3. Replies: 10
    Last Post: November 29th, 2008, 08:33 PM
  4. Flipped 208 transfer case
    By tonka in forum Modified Tech
    Replies: 5
    Last Post: July 11th, 2008, 04:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024