Results 1 to 10 of 25

Thread: Why would Jeep Do This?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Why would Jeep Do This?

    I started to re-assemble the doors after painting. Long time ago, I bought new window sweeps, for the crank-up windows, from VPW as the originals were basically gone. What a surprise when I discovered the inner sweeps are identical for both passenger and driver doors but the outers are different! The only difference in the two outers is that two of the four slots punched in the driver door frame are slightly different for the center two slots. The outer slots and the sweep length are identical! I thought something was wrong with my door but got out the '34P and sure enough, different part numbers for the outer sweeps, same part number for the inners. No rhyme or reason for this I can see. Now I find out that only passenger side outer sweeps are available. You are to drill new slots or modify the sweep to fit! Anyone else ever see this? Not sure I can slot the door now, it's painted and don't want to mess it up, so I guess I must try to move the clips on the sweep!

  2. #2

    Default

    Yes they are different! Correct outer sweeps are rubber so they wipe the glass as it goes up an down and seals (some) water from going into the door, the correct inner sweeps are the 'cat wiskers' fuzzy type material. Long ago the company (who vpw bought out) had the correct inner and outer ones, however it seems now they only have one or the other but sell tham as the same even though they arent.
    68 M-715 MVPA #2710

  3. #3
    Join Date
    Dec 2006
    Location
    New Jersey by Philadelphia
    Posts
    282

    Default

    Will the inners work on the outside as far as keeping water out?? I don't mind modifying them as long as they seal ok...

  4. #4

    Default

    I used the fuzzys both inside and out, that's what I found in town. Seems to work OK. Just make sure the drain holes in bottom of door are open. Also, the set I got had no mounting clips, I used 3M emblem adhesive tape to install them. It's a thick double sided tape and holds tight. Been on for 3 years now and used through all four seasons, still tight.

  5. #5

    Default

    No the fuzzys dont have any sealing ability, you may find some of the rubber type at restoration specialties supply co
    68 M-715 MVPA #2710

  6. #6
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    The fuzzy stips are just an anti-rattle strip really and won't seal against water coming from outside.

    Check with Steele Rubber Products:

    www.steelerubber.com

    They do mostly GM restoration stuff, but they have a lot of good online lookup and can genereally supply something very close to the original you need.
    "Free advice is worth what you pay for it."™

  7. #7
    Join Date
    Jan 2015
    Location
    Milford, Connecticut
    Posts
    5

    Default

    Hi had the same problem with me windows a few months ago, i had a glass guy Glue
    sweeps from another type of vehicle and it came out nice. good luck cronin11

  8. #8
    Join Date
    Sep 2012
    Location
    Anchorage, AK
    Posts
    414

    Default

    BJs just got back to me- no dice. They can't get them longer. I think I'll still order a set.

  9. #9

    Default

    how well do the interior wipes fit from the civilian truck on ours? I have M715 ones from memphis for the outside and after 5 years or so they are cracked, gonna put my spares on and order another set for spares, but would like to change the inners, didnt see any pics on the inside ones or how they fit.

    Thanks

    Duane

Similar Threads

  1. 401 jeep v8
    By quietman in forum Modified Tech
    Replies: 4
    Last Post: October 12th, 2009, 09:30 PM
  2. will these fit my jeep
    By mr august in forum Stock Tech
    Replies: 5
    Last Post: September 28th, 2008, 01:03 PM
  3. What You Keep In Your Jeep?
    By jacobo in forum Open Discussion
    Replies: 11
    Last Post: February 27th, 2008, 03:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024