HELP!!! I'm in turn signal hell
Post by binfordm715 on Apr 30, 2006, 2:06pm
My M715 did not have the old distribution box, so my starting point is a little muddled here.
I am installing the solid state harness setup I got from Star Electric. Here are the terminals I have to work with from them:
3-wire screw-in connector to black box mounted on firewall.
22
22/460
22/461
460
461
460/461
79 (short wire ending in a ring terminal)
That's what I have to work with on the new turn signal harness.
Here's where the manual says they go:
D -- 22
E -- 22/460
C -- 22/461
A -- 460
B -- 461
G -- 460/461
79 -- Fuel sending unit chassis ground
Fine, but I am missing several of those lettered terminals! What I have to work with on the truck harness are:
B
E
J
K
L
unlabeled wire going into truck harness (it was fused on the monkey setup I had in there [sorry, X], so it might be A?)
Any ideas, gang?