Need some help getting my stop/turn lights to work correctly. When I'm in service drive (first click on three way switch) the brake and turn signal work fine. When I turn it to the second click and turn on the headlights, the front and rear marker/turn lights both will blink when using the turn signal or brakes. I have replaced with new parts the rear lights and both turn signal switch and controller. I replaced the wiring harness between the switch and controller with a used one that I had along with trying two different used 3 way stitches that I had. Wiring along the frame appears to be intact. I did have to repair the rear wiring for the lights at the end of the frame so that all should be good. I'm assuming I have a short to ground somewhere, but I have had no luck finding it.

Sent from my SM-G930P using Tapatalk