Slap some OD Green on that bad boy, add some dents and nobody will know!
Slap some OD Green on that bad boy, add some dents and nobody will know!
Whew.
Now the real body work can start.
Sent from my iPhone using Tapatalk
The cab is off. I’m taking advantage of the warmer weather to clean up the shop and get ready to dismantle the Chevy cab/front clip.
Sent from my iPhone using Tapatalk
One panel at a time.
Sent from my iPhone using Tapatalk
Looks great so far. What's the size of your bfg tire? I'm looking for possible replacements for my michelin tires.
Last edited by glendom; June 10th, 2019 at 01:27 AM.
Those were 38’s. But not too roadworthy. Usable, but a bit dry rotted and mostly weather checked.
I traded them for a complete Dana 44 front axle hub to hub. I had a set of spare 33’s I put on until I get the cab situated.
The cab is on, but the back 32” of the cab have to be modified for it to sit it down the 5”, or so to make it look “stock”. I’ve got some vacation time coming, so that’s the plan (that and going to the lake!).
Sent from my iPhone using Tapatalk
I finally was able to tackle one side of the floor boards. I need to drop the cab from it’s current height down 6”. This “minor” mod will give me 7” of drop onto the frame.
I should be able to weld it all up by sundown.
Sent from my iPhone using Tapatalk
She’s lowered- and I still have .25 to .75 inches to play with to lower it. The bed still needs to come back another 1-2” and I have to fill the gap between the bed and cab. Whew.
Sent from my iPhone using Tapatalk
Edit:
The old 6 cyl radiator and grill support are out. The 1978 V8 radiator support is in, along with a 63 Wagoneer grill support.
I also might have to drop the cab a few more inches IMHO.
Edit:
I did drop the cab another 1.75”. It’s as low as it can go and still get clearance with the standard air cleaner and the reservoir for the hydro-boost. It’s within .75-1” of where the SM shifter would poke through the floor.
Last edited by 66stepside; August 7th, 2019 at 04:59 PM.
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |