Ok
Ok
Last edited by plumas.placer.miner; May 2nd, 2020 at 07:27 PM.
Whoa, that looks like a great start.
Sent from my iPhone using Tapatalk
ok
Last edited by plumas.placer.miner; May 2nd, 2020 at 07:25 PM.
That is not too rough. Better than 95% of the M715s out there! I don’t know about the transfer case verification but it looks original and so does the T98. So I would say it has to be a NP200.
Last edited by jhartings; February 25th, 2019 at 12:10 AM.
Very nice start. It appears that you have the original transmission and transfer case so that is a good start. Also, Chevrolet inline 6-cylinder engines are usually pretty reliable. Blue smoke is usually engine oil. It could be valve seals or rings. but for starters, oil is not all that expensive for now.
NP 200 case in the stock OD.
Is that six the one they called the Babbitt Beater?
ok
Last edited by plumas.placer.miner; May 2nd, 2020 at 07:25 PM.
ok
Last edited by plumas.placer.miner; May 2nd, 2020 at 07:26 PM.
Babbitt is the metal bearing shells are made of, and I think the engine I was referring to was the one used in CCKW & 7107 army trucks, and probably many other vehicles of that time period.
Great truck.
The 250 is a fantastic engine. If I remember right the rear main seal is a 2 piece you can replace without removing the crankshaft from the engine. And the valve cover is prone to leakage after they've been worked on... By that I mean they get bent out of shape easy when they're pulled and won't seal correctly after that. Usually if somebody used a wire wheel to clean the mating surface, that'll deform the metal just enough that it'll leak.
All tins are like that but the old Chevys seemed to be a little thinner metal to me. You might be able to find a new one if that's the case with yours.
And if it's like every other truck on here it'll need new wheel cylinders and rubber lines for sure. and if it's the original master cylinder, the old seal on it will start leaking when you start driving it regularly.
The E350 wheel cylinder conversion and a dual reservoir master cylinder conversion are pretty cheap and easy.
Beautiful plumbing job on your air lines!
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |