Is it on the reinforcement for the corner gussets or the frame top. There are numbers on the side of the frame where the sway braces are welded but can't male them out.
I was shown at the FE that there are numbers stamped on the sides of the frame that one can see in the wheelwell in front of the tire. it is a 5 digit number that starts with a 3 but is split so that the first 2 digits are above the next 3...something like:
31
245
It is NOT a vin...it is the part number for that part of the frame...there is one just like it only 1 digit off on the drivers side...and it was checked on another truck to find it has the exact same number.
So if thats what you found, nope.
The number you are looking for is on top of the frame rail on that welded on piece in front of the u channel support. When you look down from the passenger side, under the hood, at the frame rail, you see the u channel welded ont a piece of flat about 5 inches long front to rear that is welded to the top of the frame rail. This piece of flat sticks forward about 2-3 inches in front of the u channel. It is on this section of the flat that is in front of the u channel that the vins were stamped.
The arrow in the image above is trying to point to that location right on top of the frame and right in front of the u channel.
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |