Forums | Basic Training | Online Maintenance Manuals | The M715 Zone Vin Registry | VPW's M715 Parts List | Galleries | Links |
|
Open Discussion Open Discussion for all M715 series trucks |
![]() |
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
![]()
Quick thanks for the Chevy WC part numbers.
I just did a complete replacement of the stock brake system on my blue '67. Corvette MC, lines, and new wheel cylinders, without any drilling. My lines were in good shape, but they were full of crud and rust never sleeps, so I replaced all with Cupro-Nickel anyway. Every point fluid touches is brand new. I used the Chevy WC's, but could only find 7 right side units (I have 2 trucks), so went with that on both sides and just compensated in line routing on the left side. The pedal is nice and firm, and stops the wheels on jack stands pretty well. Road test this weekend... Here's my "after-action" summary and material list: $172 total Multiple fittings for 3/16 And 1/4 line: $13.77 https://www.amazon.com/gp/aw/d/B06XY...?ie=UTF8&psc=1 25' rolls of 3/16 And 1/4 cupro line with various fittings: $62 https://www.amazon.com/gp/aw/d/B015Y...?ie=UTF8&psc=1 Double flaring kit: $20 https://www.amazon.com/gp/aw/d/B01CK...?ie=UTF8&psc=1 Rear axle 3/16 fitting hose: $13 ACDelco 18J2119 https://www.amazon.com/gp/aw/d/B001D...?ie=UTF8&psc=1 Wheel cylinders (1/4 thread inputs) $19.04 ($4.76 ea) part no. WC9344/EW9345 (all passenger side, but works on either) Master Cylinder (corvette, non-power brakes): $31.93 ($25 on 11/17/17) Cardone Select 13-1371 New Brake Master Cylinder https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 (2) Front axle 3/16 fitting female ended hoses (usable, but too short for factory location; requires some bracket fab and steel line extending) $12.90 ($5.95 ea + ship) Sunsong - 2203913 - $5.95 ea (new stock) Raybestos - BH36599 - $4.46 ea (NOS) - not used in this project Dorman - H36599 - $7.65 ea (NOS) - not used in this project An important note is the hoses for the front wheels. The ones I used are about 6" too short compared to factory, so require rerouting the steel line and bringing it further from the wheel and lower on the chassis. I was running new metal lines anyway, so no big deal. Nowhere to host pics, but I stupidly ran the wheel end metal line over the kingpin, so if I ever remove it, I'll have to remove the line and bleed the brakes. Didn't think of it until the job was done and something in my head said it wasn't right. Also, these are probably not good stock replacement parts, but rather for an entire system rebuild. The wheel cylinders required 7/16-24 fittings, and I ran 3/16 to individual wheels. Every other fitting in the truck is standard to the line size, EXCEPT at the master cylinder, where I again needed 1/2-20 fittings to adapt down to 1/4" line (for the single line to the rear) and 9/16-18 to 3/16" to the front wheels. |
#42
|
||||
|
||||
![]()
GREAT post!!!!!!!!!! Part numbers, descriptions, prices....its got it all. SO SUPER!
Thanks for this...great stuff!
__________________
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will. Pro-choice, that's a LIE, babies don't choose to die!! |
#43
|
|||
|
|||
![]()
What did you use for shoes? whats the napa #
|
#44
|
||||
|
||||
![]()
I know this is an old thread but looking for some help I bought these wheel cylinders and I’m finding that they are longer rubber to rubber was this the same with yours? And does anyone know if the E350 ones are the same?
Thanks for the help |
#45
|
||||
|
||||
![]()
The e350 are identical except for the position of the mounting holes thus the necessity of opening the bottom of the stock mounting holes on the backing plate. Otherwise, they are the same.
__________________
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will. Pro-choice, that's a LIE, babies don't choose to die!! |
#46
|
||||
|
||||
![]()
Thanks I returned the others and picked up the e350 ones today.
|
#47
|
||||
|
||||
![]()
Worked great thanks guys. Working on getting a J20 booster and master installed.
|
#48
|
|||
|
|||
![]()
Found this nice "little" interchange list for the direct fit FD9346 casting (1.25" bore):
Code:
Brand Sku Type Name BENDIX 33073 Drum Brake Wheel Cylinder BENDIX33073Drum Brake Wheel Cylinder BENDIX 33074 Drum Brake Wheel Cylinder BENDIX33074Drum Brake Wheel Cylinder Casting 302857 Drum Brake Wheel Cylinder Casting302857Drum Brake Wheel Cylinder Casting 5461542 Drum Brake Wheel Cylinder Casting5461542Drum Brake Wheel Cylinder Casting 617432 Drum Brake Wheel Cylinder Casting617432Drum Brake Wheel Cylinder Casting 617438 Drum Brake Wheel Cylinder Casting617438Drum Brake Wheel Cylinder Casting FD9346 Drum Brake Wheel Cylinder CastingFD9346Drum Brake Wheel Cylinder CERTIFIED W9344 Drum Brake Wheel Cylinder CERTIFIEDW9344Drum Brake Wheel Cylinder CERTIFIED W9345 Drum Brake Wheel Cylinder CERTIFIEDW9345Drum Brake Wheel Cylinder ACDelco 172-338 Drum Brake Wheel Cylinder ACDelco172-338Drum Brake Wheel Cylinder ACDelco 172-339 Drum Brake Wheel Cylinder ACDelco172-339Drum Brake Wheel Cylinder ACDelco 172-726 Drum Brake Wheel Cylinder ACDelco172-726Drum Brake Wheel Cylinder ACDelco 172-727 Drum Brake Wheel Cylinder ACDelco172-727Drum Brake Wheel Cylinder MITSUBOSHI J0920334 Drum Brake Wheel Cylinder MITSUBOSHIJ0920334Drum Brake Wheel Cylinder MITSUBOSHI J0920335 Drum Brake Wheel Cylinder MITSUBOSHIJ0920335Drum Brake Wheel Cylinder AIMCO W906049 Drum Brake Wheel Cylinder AIMCOW906049Drum Brake Wheel Cylinder AIMCO W906050 Drum Brake Wheel Cylinder AIMCOW906050Drum Brake Wheel Cylinder WAGNER F9344 Drum Brake Wheel Cylinder WAGNERF9344Drum Brake Wheel Cylinder WAGNER F9345 Drum Brake Wheel Cylinder WAGNERF9345Drum Brake Wheel Cylinder WAGNER WC9344 Drum Brake Wheel Cylinder WAGNERWC9344Drum Brake Wheel Cylinder WAGNER WC9345 Rear Right Wheel Cylinder WAGNERWC9345Rear Right Wheel Cylinder RAYBESTOS WC-9344 Drum Brake Wheel Cylinder RAYBESTOSWC-9344Drum Brake Wheel Cylinder RAYBESTOS WC-9345 Rear Right Wheel Cylinder RAYBESTOSWC-9345Rear Right Wheel Cylinder AUTOSPECIALTY W-84007 Drum Brake Wheel Cylinder AUTOSPECIALTYW-84007Drum Brake Wheel Cylinder AUTOSPECIALTY W-84008 Rear Right Wheel Cylinder AUTOSPECIALTYW-84008Rear Right Wheel Cylinder CARQUEST EW9344 Drum Brake Wheel Cylinder CARQUESTEW9344Drum Brake Wheel Cylinder CARQUEST EW9345 Rear Right Wheel Cylinder CARQUESTEW9345Rear Right Wheel Cylinder CENTRIC 134.64007 Drum Brake Wheel Cylinder CENTRIC134.64007Drum Brake Wheel Cylinder CENTRIC 134.64008 Rear Right Wheel Cylinder CENTRIC134.64008Rear Right Wheel Cylinder DORMAN W9344 Drum Brake Wheel Cylinder DORMANW9344Drum Brake Wheel Cylinder DORMAN W9345 Rear Right Wheel Cylinder DORMANW9345Rear Right Wheel Cylinder NAPA 9345 Drum Brake Wheel Cylinder NAPA9345Drum Brake Wheel Cylinder CHRYSLER 1664582 Rear Right Wheel Cylinder CHRYSLER1664582Rear Right Wheel Cylinder CHRYSLER 1664583 Drum Brake Wheel Cylinder CHRYSLER1664583Drum Brake Wheel Cylinder CHRYSLER 1669964 Rear Right Wheel Cylinder CHRYSLER1669964Rear Right Wheel Cylinder CHRYSLER 1669965 Drum Brake Wheel Cylinder CHRYSLER1669965Drum Brake Wheel Cylinder CHRYSLER 920334 Drum Brake Wheel Cylinder CHRYSLER920334Drum Brake Wheel Cylinder CHRYSLER J0920334 Drum Brake Wheel Cylinder CHRYSLERJ0920334Drum Brake Wheel Cylinder CHRYSLER J0920335 Drum Brake Wheel Cylinder CHRYSLERJ0920335Drum Brake Wheel Cylinder FORD TCAA-2261-A Rear Right Wheel Cylinder FORDTCAA-2261-ARear Right Wheel Cylinder FORD TCAA-2262-A Drum Brake Wheel Cylinder FORDTCAA-2262-ADrum Brake Wheel Cylinder GM 2622919 Drum Brake Wheel Cylinder GM2622919Drum Brake Wheel Cylinder GM 2622920 Rear Right Wheel Cylinder GM2622920Rear Right Wheel Cylinder GM 3767121 Drum Brake Wheel Cylinder GM3767121Drum Brake Wheel Cylinder GM 37671212 Drum Brake Wheel Cylinder GM37671212Drum Brake Wheel Cylinder GM 3767122 Rear Right Wheel Cylinder GM3767122Rear Right Wheel Cylinder In a crunch (i.e. stranded, middle-of-nowhere) if you had a spare, you could swap one for the other if you just massage the brake line 1 inch further over. |
#49
|
|||
|
|||
![]()
The easiest way to loosen the hub screws is to use a flat punch and strike the screw face a few times avoiding the screw slot. Mine came out without any effort. I did douse them with Kroil Oil first!!! Great thread!
James |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Master Cylinder Conversion - Upgrade | Warthog | Modified Tech | 62 | April 6th, 2021 06:21 PM |
Wheel cylinder ? | 93-12smoke | Modified Tech | 1 | November 30th, 2009 09:31 PM |
stock wheel cylinder | Chef | Stock Tech | 2 | September 30th, 2008 06:54 AM |
Wheel cylinders to Vette master cylinder Q's | Nuke_Bill | Modified Tech Archives | 10 | March 31st, 2004 06:48 PM |