| Forums | Basic Training | Online Maintenance Manuals | The M715 Zone Vin Registry | VPW's M715 Parts List | Galleries | Links |
 |
|
|
|||||||
| Modified Tech Tech forums for Modified M715 series vehicles |
 |
|
|
Thread Tools | Display Modes |
| Forums | Basic Training | Online Maintenance Manuals | The M715 Zone Vin Registry | VPW's M715 Parts List | Galleries | Links |
|
|
|
|
|||||||
| Modified Tech Tech forums for Modified M715 series vehicles |
|
|
|
Thread Tools | Display Modes |
|
#11
January 10th, 2011, 09:18 PM
|
||||
|
||||
I also installed the ignitor in my M37 and it starts alot easier and runs smooth as silk throughout the rpm range.
|
|
#14
March 28th, 2011, 09:57 AM
|
||||
|
||||
|
amendments
Edit was limited to 5 Minutes, I missed that limit...
Pertronix, only few items  next step, have a look inside the cap; not bad  the old stuff, not bad too  condenser pulled  more stuff pulled  Pertronix installed  magnet sleeve: Please give a rough hint, have I have to turn it 180°?  That's for the moment, I have to crimp a ring conncetor and then it should be done. Of course the rotor has to be installed again.
|
|
#15
March 28th, 2011, 09:58 AM
|
||||
|
||||
|
sorry for another amendment
BTW, did new spark plugs too
removing spark plug wire, not the correct tool, but it works (from adirondacks)  New Spark plug seems to be slightly different than used one, got it from Erik's. I noticed a longer thread, Spark is autolite 2344, the old is 2245; I assume that might be work, what do you think?  Sorry for extending it so much...
|
|
#16
March 28th, 2011, 04:47 PM
|
||||
|
||||
|
spin it over by hand first just to be sure, i put a pertronix in my m37 and it was well worth the $, easy starts and smooth acceleration throughout the entire power range (which aint much) but it was well worth it.
|
|
#18
March 28th, 2011, 08:26 PM
|
||||
|
||||
|
I put in Autolite 2344's from Erik's Military Supply last summer, they work fine and are the correct plug. I also changed out the plug wires. They are also military from Erik's. Truck runs great, relatively smooth. Haven't got around to changing out the ignitor yet. Seems the Pertronix is the way to go tho. Seems rather simple to do.
__________________
militarypotts Spec/4 Military Police, Vietnam Era, "Does the noise in my head bother you? Welcome to the Twilight Zone!"
|
|
#19
March 28th, 2011, 08:34 PM
|
||||
|
||||
|
N2S3, In the one photo, the plug wires seem awful close to the exhaust manifold. Could it be the ignitor cap is off and just hanging down? If not you really need to get those things away from the heat. Nice explanation and photos of the Pertronix install. Appreciate it, thanks.
__________________
militarypotts Spec/4 Military Police, Vietnam Era, "Does the noise in my head bother you? Welcome to the Twilight Zone!"
|
|
#20
March 28th, 2011, 08:43 PM
|
||||
|
||||
|
2344 is the correct mil waterproof plug for the 230...I dont know what the other is for off hand.
__________________
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will. Pro-choice, that's a LIE, babies don't choose to die!!
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
