ForumsBasic TrainingOnline Maintenance ManualsThe M715 Zone Vin RegistryVPW's M715 Parts ListGalleriesLinks

Go Back   M715 Zone > General Tech > Modified Tech > Modified Tech Archives

Thread Tools Display Modes
Old May 25th, 2004, 06:37 PM
Nuke_spicergear Nuke_spicergear is offline
Private 1st Class
Join Date: Dec 2003
Posts: 272
Nuke_spicergear is an Observer

For anyone that's done shackle reversal and springover, how much longer did you go with the rubber flex line going from the frame to the axle (rear) or the frame to the spindles?
Big Blocks RULE!
Old May 25th, 2004, 08:01 PM
bggrntrk bggrntrk is offline
Join Date: Jan 2004
Location: SW MO
Posts: 81
bggrntrk is a Soldier

haven't done one on a m715 but i lifted a 74 chev 6 inches and got longer rubber lines from Springfield Brake Co. in Springfield Mo. 1-800-333-2725 or 417-862-9233, hope that helps. they can make lines. larry
Old May 25th, 2004, 08:20 PM
Nuke_spicergear Nuke_spicergear is offline
Private 1st Class
Join Date: Dec 2003
Posts: 272
Nuke_spicergear is an Observer

Thanks Larry...I'll check them out tomorrow! I've been digging into it more too this evening and found one of the 4x4 rags had an add for a place and I went to their site. They had Earls and Russel stuff but nothing was in stock. I checked Summit and they have different models and lengths in stock.
Big Blocks RULE!
Old May 25th, 2004, 08:50 PM
Doug's Avatar
Doug Doug is offline
Das Fire Führer!
Join Date: Dec 2003
Location: Central Iowa
Posts: 1,582
Doug is a Soldier

I thought about just hooking two together, with a bungee in the middle to keep it out of the way and also allow it to flex if needed. No spring over, just planning for more flex in the future.
This post is closed-captioned for the hearing impaired.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
brake lines henry715 Open Discussion 2 March 6th, 2010 02:14 PM
Brake Flex-lines fng Modified Tech 5 February 28th, 2009 04:15 PM
rear rubber brake line lee brown Open Discussion 3 January 26th, 2009 06:45 AM
Why are the rear brake lines 1/4 inch? vacca rabite Open Discussion 16 September 8th, 2008 09:04 AM
Rubber (or flex) brake lines? vacca rabite Modified Tech 9 June 6th, 2008 08:41 AM

All times are GMT -7. The time now is 03:11 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
1998 - 2021

This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c
If you have any suggestions, comments, problems or questions, contact:

Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC.

Written permission can only be obtained by contacting

Copyright 1998-2021