Results 1 to 4 of 4

Thread: foreverunstopable : XL spring-over picture

  1. #1

    Default foreverunstopable : XL spring-over picture

    XL spring-over picture
    Post by foreverunstopable on Sept 1, 2006, 6:54pm

    Hi guys. Does anyone know the height a sprung over 715 on stock axles with 11.00R16's would be from ground to cab bow at its highest point?

  2. #2

    Default tacomainoh :

    Re: XL spring-over picture
    Post by tacomainoh on Sept 1, 2006, 8:10pm

    about 8-9" higher than it is now, roughly. Figure this :

    1/2 the difference in tire sizes+thickness of springs+1/2 the axle diameter. Off the top of my head that ought to give you your lift amount.

  3. #3
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default brute4c :

    Re: XL spring-over picture
    Post by brute4c on Sept 1, 2006, 9:41pm

    Somewhere in that neighborhood....springovers give between 5 and 6 inches of lift and the tires are roughly 4 inches taller.....of which 2 inches actually raises the centerline of the axle....

    So 7 to 8 inches I would guess....

  4. #4

    Default foreverunstopable :

    Re: XL spring-over picture
    Post by foreverunstopable on Sept 1, 2006, 9:43pm

    Thanks! want to make sure it will fit in the garage.

Similar Threads

  1. foreverunstopable : XL Tubes and Flap
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 10
    Last Post: November 12th, 2009, 03:50 AM
  2. foreverunstopable : Lav Weight
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 2
    Last Post: November 12th, 2009, 01:38 AM
  3. foreverunstopable : Anyone have boots?
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 3
    Last Post: November 12th, 2009, 01:17 AM
  4. foreverunstopable : Hummer Wheels
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 7
    Last Post: November 10th, 2009, 11:49 PM
  5. foreverunstopable : Steering Problem
    By PseudoZone in forum PseudoZone - Open Archive
    Replies: 4
    Last Post: November 10th, 2009, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024