Results 1 to 3 of 3

Thread: 40grit : Receiver Hitch from RV( pics for Timmah)

  1. #1
    Join Date
    May 2004
    Location
    Anchorage, Alaska
    Posts
    250

    Default 40grit : Receiver Hitch from RV( pics for Timmah)

    Receiver Hitch from RV( pics for Timmah)
    Post by 40grit on Jul 8, 2006, 5:41pm

    This is an adjustable hidden hitch designed for RV's. I had to make a little block to compensate for the very rear of the frame, but with 3 5/8" grade 8 bolts on each side, it should drag a house no problem... bolts aren't tight in these pics...need to go buy Gr8 bolts






    And one pic of the little shackles we have laying around work..
    this is one of the smaller ones that was small enough to fit in the pintle...

  2. #2

    Default fredrader :

    Re: Receiver Hitch from RV( pics for Timmah)
    Post by fredrader on Jul 8, 2006, 6:28pm

    Cool,Do you have a part # for the hitch ?

  3. #3
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default barrman :

    Re: Receiver Hitch from RV( pics for Timmah)
    Post by barrman on Jul 8, 2006, 9:58pm

    That shackle is almost small enough to go with Will's snatch block. You know why he needs a square foot of bed floor? Because he never took the block out of the back of his truck. It didn't matter where you were on the trails, if Will hit a bump, that block would bounce and everybody could hear it. I think it broke the lid off one of his coolers it was so small.

    Nice hitch by the way.

Similar Threads

  1. fisherman : Receiver Hitch Finishished except paint
    By fisherman in forum PseudoZone - Mod Tech Archive
    Replies: 5
    Last Post: December 15th, 2009, 08:00 PM
  2. 40grit : Brake line ID w/ progress pics
    By 40Grit in forum PseudoZone - Open Archive
    Replies: 8
    Last Post: November 11th, 2009, 04:26 AM
  3. 40GRIT Hydro-clutch pix
    By MarknessMonster in forum Modified Tech
    Replies: 16
    Last Post: October 3rd, 2008, 04:19 PM
  4. hitch
    By cnewman425 in forum Open Discussion
    Replies: 17
    Last Post: February 26th, 2007, 11:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024