Re: timing chain copper links?
Post by brute4c on Oct 23, 2006, 5:44pm

Probably the ones you needed!!

The problem with lining up he timing marks on the grears like you do with other stuff is that there is no mark on the cam gear...you point it down with the #1 cam lobe...points straight down as ha been mentioned above...
The crank gear has a mark that the chain lines up to on the drivers side of the gear, straight across from the mark to the link...that should put the upper copper link right at the bottom of the cam gear...but no mark there to reference...


Its an oddball...especially in this area...