Results 1 to 3 of 3

Thread: V8 Exhaust

  1. #1
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    This is not a post about headers v iron manifolds. This is about how people have routed the drivers side pipe. I see several options.

    1) Side pipes, exit the pipe before the fuel tank.

    2) Cross over before the trans crossmember like a stock system, then duel pipes running parallel the rest of the way back.

    3) Cross over into a single pipe and muffler.

    4) Outside of the frame. Get the system outside of the frame up by the front spring mounts. Then put mufflers and everything else out there also.

    Thats all that I can think of. I am looking for what people have done and pro's and con's of it. Thanks.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  2. #2
    Join Date
    Dec 2003
    Location
    Richboro,Pennsylvania
    Posts
    363

    Default V8 Exhaust

    Another variation is to go thru the crossmember and have the driver side crossover just under the rear driveshaft output yoke/e.brake assembly, then run them both parallel to the stock tailpipe location.
    It is real tight up in the chassis with nothing hanging down below the frame. I ran mine with this set up for a while, then removed the tailpipes and installed 45 degree turndown pipes to bring out the true Flowmaster sound.

  3. #3

    Default

    mine are routed to each side, in front of the rear wheels about a foot. Puts the muffler right under your feet, and is very hot w/no insulation on the floor. I like Mike's idea.... sounds pretty slick.
    **I heart Bump_r **

Similar Threads

  1. sermis : 350 exhaust
    By sermis in forum PseudoZone - Open Archive
    Replies: 8
    Last Post: November 11th, 2009, 03:19 AM
  2. Exhaust
    By scottsmyth in forum Modified Tech
    Replies: 4
    Last Post: February 26th, 2009, 11:14 PM
  3. Exhaust
    By fisherman in forum Modified Tech
    Replies: 8
    Last Post: June 11th, 2007, 02:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024