ForumsBasic TrainingOnline Maintenance ManualsThe M715 Zone Vin RegistryVPW's M715 Parts ListGalleriesLinks

Go Back   M715 Zone > General Tech > Stock Tech

Stock Tech Tech forums for Stock M715 series vehicles

Reply
 
Thread Tools Display Modes
  #1  
Old February 27th, 2008, 08:35 PM
mattman002 mattman002 is offline
New Recruit
 
Join Date: Jan 2008
Location: North Central Texas
Posts: 16
mattman002 is a Soldier
Default Brake Line Adapter Questions

I'm replacing the brake line from the master cylinder to the brake switch with a braided line and was wondering if anyone knew the thread size/count for the male ends that go into the master cylinder and brake switch.
Reply With Quote
  #2  
Old February 27th, 2008, 09:03 PM
brute4c's Avatar
brute4c brute4c is offline
Grand Poobah
 
Join Date: Sep 1998
Location: North Central Wisconsin
Posts: 11,464
brute4c is a Soldier
Default

I believe the brake lines are standard 3/16ths brake line and so the fittings on the ends of one of those lines would be the ones you need...sorry I dont know the count and all off hand...someone else may.
Reply With Quote
  #3  
Old February 27th, 2008, 09:31 PM
LuckyPabst's Avatar
LuckyPabst LuckyPabst is offline
Private 1st Class
 
Join Date: Dec 2003
Location: Lone Pine, CA
Posts: 451
LuckyPabst is a Soldier
Default

3/8-24 IFM, both ends.
Reply With Quote
  #4  
Old February 28th, 2008, 06:53 AM
Barrman's Avatar
Barrman Barrman is offline
Chief 9-flats

 
Join Date: Dec 2003
Location: Giddings, Texas
Posts: 7,742
Barrman is a Soldier
Default

I am not sure, but I think there is some kind of DOT rule about having metal lines from the MC as far as you can go. Then the flexible lines at the rear axle and each front corner. The idea being that any flexible line is going to flex some. That flex will do several things. Make a pedal spongy and eventually wear out the flexible line are two I can think of right away.

With a stock engine you don't have to worry about heat, but a V8 will make a lot of heat near the line from the MC to the switch block. That could cause shortened life and possible brake fluid boiling.

That was the safety warning. I personally don't see anything wrong with it as long as you use quality parts and do it right. If your state has inspections though you might run into trouble. Something else to check on I guess.
__________________
Remember if you didn't build it you can't call it yours.

6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
Reply With Quote
  #5  
Old February 28th, 2008, 09:05 AM
mattman002 mattman002 is offline
New Recruit
 
Join Date: Jan 2008
Location: North Central Texas
Posts: 16
mattman002 is a Soldier
Default

Thanks for all the help and suggestions. I hope to possibly be tackling the brakes this weekend or the next. Thanks again
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brake line diameter?? DivingKaiser Modified Tech 1 April 6th, 2010 04:23 AM
fisherman : Brake line pressure switch for brake lights. fisherman PseudoZone - Open Archive 12 November 11th, 2009 09:33 PM
Brake Line Tools Tomahawk715 Modified Tech 10 November 1st, 2009 09:01 PM
Brake Line Problem? fisherman Modified Tech 14 October 2nd, 2007 07:13 AM
brake line to master cyl. ?? Elohim1 Modified Tech 4 February 8th, 2007 09:00 PM


All times are GMT -7. The time now is 01:02 PM.

 

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
1998 - 2019


This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c
If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com

Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC.

Written permission can only be obtained by contacting
brute4c@m715zone.com

Copyright 1998-2019