Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Need more stopping power!!

  1. #11

    Default

    I'm kicking a few emails back and fourth with Wilwood to find a good caliper for the rotor. GT, thanks for the offer but I'll probably borrow a wheel from Mike when I get to that point as he's closer. Mike, In the next three weeks, I should have some pretty stoudt brakes to assemble on one of my Rockwells and I'll test the calipers I get with that to see if they'll work. I want this to be basically as simple as possible and as bolt on as possible. I'm happy with the rotor I found, although it will need a little trimming on it's overall diameter to work with a 16" wheel. 15" is out with this set up so far. The same rotor will work front or rear. The plate wheel will be much more simple because of the flat center, but if I get them to work with a stock wheel...they'll work with them all. I'll keep you guys posted...one of ya may volunteer for some testing for me too.
    Big Blocks RULE!

  2. #12

    Default

    and by the time you get it done I'll be there to document it hehehe
    **I heart Bump_r **

  3. #13

    Default

    spicer, I'll be following along, but keep me posted if you need that volunteer.
    Mike F

Similar Threads

  1. Just stopping in to say HI!!
    By ne715 in forum Open Discussion
    Replies: 10
    Last Post: July 26th, 2008, 10:47 AM
  2. Need more power?
    By okie715 in forum Modified Tech
    Replies: 4
    Last Post: March 13th, 2008, 01:54 PM
  3. Power steering
    By jfharris in forum Modified Tech
    Replies: 5
    Last Post: March 25th, 2007, 09:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024