I need to replace my master cylinder. Does any one have one for sale?
Thanks
Dan
I need to replace my master cylinder. Does any one have one for sale?
Thanks
Dan
Dan, I would STRONGLY recommend you convert to a dual master system. This is easily done with a Cardone 10-1331 (i think) master cylinder, a line plug, a couple of adapters and a little line.
If you blow your single master, or any one of the wheel cylinders, you're in no-brake trouble. Well worth the $40 in parts to convert to a dual setup for safety purposes.
67 M725 67 M715 68 M715
I second that. Switch over to a dual mc and silicone brake fluid after you rebuild all your wheel cylinders. Then don't worry about the brakes for another decade or so.
Remember if you didn't build it you can't call it yours.
6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw
I just need one to keep me going till summer.
Dan
I have an NOS one sitting around...its never had fluid in it but is 30-40 years old...pm if you are interested.
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!
I was looking to do this last fall when the brakes went. I got a number of TS 101371 from Napa. Is this the same?
US ARMY
Napa carries the stock master...its really pricey though...look up this number with them:
UP 35036
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!
Almost always NOS ones on Ebay for under $50.
Brute4c
did you get my email yesterday.
Dan
I did get the pm you sent...I replied at 11pm last night...did you not get that?
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |