ForumsBasic TrainingOnline Maintenance ManualsThe M715 Zone Vin RegistryVPW's M715 Parts ListGalleriesLinks

Go Back   M715 Zone > General Tech > Open Discussion > Open Discussion Archives

Thread Tools Display Modes
Old December 24th, 2006, 01:12 PM
Archiver Archiver is offline

Join Date: Nov 2006
Posts: 21
Archiver is a Soldier
Default Wiper Blades

Windshield wipersTechnical Forums » Open Discussion Archives » Windshield wipers

Windshield wipers
Post by oilcan on Nov 9, 2006, 7:04am

I picked up a pair of napa wiper arms & blades for my M35, and as it turns out, they'll fit a 715 with only a little bit of work.

Here are the numbers I got from
Wiper arms- napa 60-750
Blades- napa 60-011-1, trico 11-1

These use a bayonet mounting deal, so you'll find replacements in any parts store. The bad news is, they're silver.
The 60-750 arm comes with a bunch of junk that you don't need, so there might be another part number with less stuff a little cheaper. Could be 60-725, but I haven't researched it yet.

The only mod needed is to pull the adjustable arm out and chop off about an inch for the blade to clear the windshield gasket at the bottom. Put it back together after paint and tighten the set screw, and have a nice day.

If you want to go junkyard shopping, the kaiser-era cj's have the same wiper arm, but most I've seen use the odd u-shaped connection at the blade and are pretty crusty.
Re: Windshield wipers
Post by k8icu on Nov 9, 2006, 11:14pm

I was going to say a little OD paint will fix the problem of the arms being silver! Good work.
Re: Windshield wipers
Post by oilcan on Nov 11, 2006, 6:13pm


Another thing. All this stuff will run just shy of 55 clams at napa.
Re: Windshield wipers
Post by hatattacks on Nov 11, 2006, 8:54pm

Hey I just picked up a new set of wipers. fit with no issue. All I had to do is pull the little pin from the old blades. and they fit with no issue at all. NAPA # 60-1033 Classic wiper blades

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slipping wiper blades Cornholio Stock Tech 10 November 12th, 2009 01:55 PM
jfnemt1ff1 : Wiper blades PseudoZone PseudoZone - Open Archive 1 November 12th, 2009 01:43 AM
Need Wiper Arms/Blades for 68 M715 Glideman Stock Tech 11 September 14th, 2009 06:53 AM
Wiper blades-revisited terryb Stock Tech 5 April 15th, 2007 06:47 PM

All times are GMT -7. The time now is 06:04 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
1998 - 2021

This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c
If you have any suggestions, comments, problems or questions, contact:

Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC.

Written permission can only be obtained by contacting

Copyright 1998-2021