Results 1 to 5 of 5

Thread: U-Joint Specifications

  1. #1
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    Several people have asked about the specs for the different u-joint sizes. The June 2004 issue of Four Wheeler has them listed.

    Series 1310

    overall width=3-7/32"

    bearing cap diameter=1-1/16"

    Series 1330

    overall width=3-5/8"

    bearing cap diameter=1-1/16"

    Series 1350

    overall width=3-5/8"

    bearing cap diameter=1-3/16"

    Series 1410

    overall width=4-3/16"

    bearing cap diameter=1-3/16"

    It list some other relevant data such as load rating also.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

  2. #2
    Join Date
    Mar 2004
    Location
    northern Arizona
    Posts
    1,025

    Default

    Not to sound TOO stupid, but what is the default size, and is there enough room to upsize?

    rich
    67 M725 67 M715 68 M715

  3. #3

    Default

    1310 is stock size

    i put 1350 everywhere in mine, but its not stock driveline

  4. #4

    Default

    Why did you stop at 1410? Gimme two more Barrman!!
    Big Blocks RULE!

  5. #5
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default

    That is all the sizes that the magazine listed.
    Remember if you didn't build it you can't call it yours.

    6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.

    https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw

Similar Threads

  1. U- Joint straps
    By jeepjunker in forum Stock Tech
    Replies: 2
    Last Post: June 2nd, 2009, 09:19 AM
  2. U-joint question....
    By Snuffy in forum Open Discussion
    Replies: 4
    Last Post: May 22nd, 2009, 11:26 PM
  3. Stock Specifications
    By CTM in forum Stock Tech
    Replies: 2
    Last Post: December 5th, 2008, 09:54 PM
  4. Driveshaft u-joint P/Ns??
    By TheWarTapes in forum Stock Tech
    Replies: 6
    Last Post: March 3rd, 2007, 10:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024