Results 1 to 1 of 1

Thread: Civi Plug wires made to fit

  1. #1

    Default Civi Plug wires made to fit

    So after looking for a long time, I found very little information on how to replace the waterproof military wires with civi wires. So here is how I converted a civi set of plug wires to work with military cap.
    Plug wires are OmniSpark (Oreilly) $16.00 part number 9996. Spark plug wire set for 6 cylinder and they were plenty long enough...I had to cut some down to length.
    After I got the plug wires I discovered that the plug wires I bought were wire core just like the Military. So I was able to take the spring off the end of the military and solder them on to the new plug wires as seen in picture below. I was able to compress the spring and use the plug wire boot to hold the spring compressed, with a little assistance on zip ties.
    Attached Images Attached Images

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024