Results 1 to 6 of 6

Thread: Bed lifting tab hole size?

  1. #1

    Default Bed lifting tab hole size?

    My lifting tabs were cut off flush with the bed. I would like to fabricate new ones but could only guess at the hole size. If someone could measure the hole in theirs it would be greatly appreciated.

  2. #2

    Default

    24 views and 5 hours later and no answer? I don't quite get that. Despite hoards of mosquito's and aggressive deer, I will do it. I went out and measured. My two front ones are cut off, my back ones are not. The hole is 1.5 inches exactly. The top of the hole is 3/4 from the top of the tab. The top of the tab is not a perfect radius. It is mildly bell shaped. If you are a detail nut like myself and want a picture to show the profile, let me know and I will take one.
    Hope this helps...
    Last edited by Kaiserjeeps; June 3rd, 2020 at 11:17 PM.

  3. #3

    Default

    Quote Originally Posted by Kaiserjeeps View Post
    24 views and 5 hours later and no answer? I don't quite get that. Despite hoards of mosquito's and aggressive deer, I will do it. I went out and measured. My two front ones are cut off, my back ones are not. The hole is 1.5 inches exactly. The top of the hole is 3/4 from the top of the tab. The top of the tab is not a perfect radius. It is mildly bell shaped. If you are a detail nut like myself and want a picture to show the profile, let me know and I will take one.
    Hope this helps...
    Some of us check in but once a day-- had I seen that post I would have provided the requested info.

  4. #4

    Default

    Thanks for being so detailed, and yes I am a bit of a detail nut but did find a picture. Appreciate you fighting the mosquitos and deer to get me this info.

  5. #5

    Default

    I get what you are saying nailhead. And thank you for guys like you. It just seemed to be a case of too many moving to fast for something so simple for so many views and crickets. It got handled.

    Jim67 the mosquitos are bad this year and the deer want an apple. I had to almost run. Glad you found what you were looking for.

  6. #6
    Join Date
    Jul 2009
    Location
    Louisville, KY
    Posts
    1,041

    Default

    Not sure you got an answer...Hope this helps.



    Thanks for all the help!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024