Results 1 to 10 of 11

Thread: seat help

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default seat help

    I have stock seat frames but looking for stock cushions and covering - any ideas or leads ?

  2. #2
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    Get some high-density foam--4" for the seat and 2" for the back. Then order a set of replacement canvas covers from Weebee Webbing or New Life Canvas. Should be about $100 for the both.

    That way you can do away with the horsehair and the springs. Replace your plywood with a new piece of 3/4" if you need to as well. I did all this on the deuce passenger seat and will most likely eventually get rid of the springs and horsehair on my driver's seat as well. The stock seats are almost comfortable this way!

    Good luck!
    -- Tim Taylor


  3. #3
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    As stated above, do the foam and plywood thing. It works quite well.

    I did the seatcovers from Vintage Power Wagons and they ran $120 shipped. They also fit very well too.

    The high density foam came from a local fabric store and enough to do both seats with leftover foam was $65.

    I used 3/4" plywood for the base, but didn't need any on the back, as the frame has a metal backing that is almost as wide as the outer frame.

  4. #4
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    Yes, the wood is only for the seat. The stock seats use only some horsehair padding under the canvas for the back. And it feels like it too!
    -- Tim Taylor


  5. #5
    Join Date
    Jul 2007
    Location
    Rhoadesville, Virginia (five miles from no place)
    Posts
    5,125

    Default

    Quote Originally Posted by Binford View Post
    Yes, the wood is only for the seat. The stock seats use only some horsehair padding under the canvas for the back. And it feels like it too!
    Even the HD foam and the new covers feel like they compress after about 15 minutes.....

  6. #6

    Default

    I have thought about using a thinner bit of the foam over the springs an horsehair, get the support of the springs w/ a nice foam cushion to keep from feeling them
    68 M-715 MVPA #2710

Similar Threads

  1. Seat Options
    By Roy in forum Modified Tech
    Replies: 22
    Last Post: December 6th, 2009, 11:48 PM
  2. Seat covers
    By stranman in forum Stock Tech
    Replies: 2
    Last Post: February 24th, 2009, 07:44 PM
  3. bench seat
    By stranman in forum Modified Tech
    Replies: 8
    Last Post: May 21st, 2008, 10:06 PM
  4. help with seat cushins
    By reltrk in forum Open Discussion
    Replies: 1
    Last Post: May 4th, 2007, 04:36 PM
  5. Seat Cushions
    By Barrman in forum Open Discussion
    Replies: 7
    Last Post: April 3rd, 2007, 09:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024