door to cab seals

[green goat]

Not sure who it was that had the new rubber for either end of the door to cab seals but the way I understood it the guy he sent them off to never got them repro'd. I am still interested in replacing mine and am assuming that they aren't available at some place like memphis equipment. If this is the case there are alot of different businesses here and if someone can tell me what kind of shop it takes to make those I'll start doing some checking.

[Binford]

The guy who was going to look into making them for us all is VaM715 from the PseudoZone site. I have sent him an e-mail to ask for a status report on getting them made. I'll keep you posted here on what I find out.

[MarknessMonster]

Thanks Binford. I've been waiting too, so don't forget about me needing a couple sets.

[Binford]

The list of those interested is long, indeed!

[Binford]

Got a quick response back from VaM715. He's had some health issues to contend with, but says he should be getting back to it fairly soon and will be in touch about it soon.

[green goat]

Patience in some things for me is a challenge. I'd like to look into it anyway so if you have any ideas on what type of company I would need to contact please let me know and I'll get started.

[W.Webster]

The guy who was going to look into making them for us all is VaM715 from the PseudoZone site. I have sent him an e-mail to ask for a status report on getting them made. I'll keep you posted here on what I find out.

Hey Tim...

If and when these door seals get manufactured i had also put my name in for a set both doors. how did the vacation go, i got one of the radio's we talked about with no problem.
Talk to you soon.

Walter Webster
MVPA # 4647
Chilliwack B.C.

[rpgdeity]

Tim, do you remember about how many people said they wanted a set, from the thread on the Psuedo Zone? Was it roughly 100? I can't get to the old zone (if its even still up) to see if I can find that thread.

[Binford]

You can still get to the PseudoZone by going to: http://m715zone.proboards102.com/

To recap, VaM715 said he was going to get an estimate on what the cost would actually turn out to be. Obviously the more who want them the better. He gave a very rough preliminary estimate that a full 2-door set of seals would run about $100.

Let's see, here are the Zoners who said they wanted to order a set of door seals, with the minimum number of seals they said they wanted:

1 fsjguy
2 over2land
6 kwai
12 robertcowan (possibly 24)
2 boghog (possibly 3)
2 fisherman
1 brute4c
2 bbm715
1 BinfordM715 (possibly 2)
2 Barrman
1 gonz
2 40grit
1 tomcat (possibly 2)
3 wi715
2 teking
1 bluesman2a
1 snuffy
1 Bulldawg67
1 knave
1 texan (possibly 2)
1 kaiserjeeps
1 xjchief (possibly 2)
1 porkchop
1 mrsofttail
1 shepsjeep
1 rip68
1 vrod02
1 alex
1 hondo100
1 grantshire
1 steve715
1 tacoma
1 Hetzer
1 fng
1 green goat
1 MarknessMadder (possibly 2)
1 ColHart
1 compexp
1 agengr
1 carmen
1 rpgdeity
1 webstercj8
1 jlogan
1 Calpyro
1 CAP
1 Armada
1 robsgp
1 archjr
1 no3shopset
1 countcv61
1 cvs1
1 warwick
1 gilberto
1 lbuck78 (possibly 2)
1 ChalkOutline
1 pghjeeper

total/possible
81 / 99

That's from the thread "Who was willing to repro the cab door corner seals" and the original "Door seal" thread as well. I think there may have been a previous thread about this as well. I'll look later. But this is the list as of that point. Again, no one is committed until a solid price is given.

As others post up here that they want them, I will edit this list to add them in, such as I just did with FNG.

So post up!

[fng]

Add FNG to that list please. One set.