So I have a 360/4 speed/tcase out of a 1974 J truck that will be swapped in
What motor mounts do I need to get? I'm fine with modifying a bit, but would like to start with something close.
Thanks!
So I have a 360/4 speed/tcase out of a 1974 J truck that will be swapped in
What motor mounts do I need to get? I'm fine with modifying a bit, but would like to start with something close.
Thanks!
so I'm installing a J truck engine/trans/tcase as 1 unit
not using the stock divorced T case
will I have driveshaft length problems?
What transmission/tcase are you going to use? That will help people who did the same swap let you know what they did for drive line adjustments.
Come and take it
Go work at joann fabrics if you can't shoot a gun
360 / T18/ D20
I have both the J truck and the M715 driveshafts
was hoping the rear driveshaft wouldn't be too long
thanks
changing gears....
gonna swap in a 2002 5.3 LS and a 4l60 and keep the NP200
does anyone have an example of what they did for Tcase lever brackets with an engine/trans swap?
thanks
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |