I want to make my truck ride quieter and ride smoother . I want to make it as quiet and smooth riding as i can . So if i changed out the stock everything and went with a 383 chevy 700 r4 trans and a 205 divorced transfer case then take out 2 of the lower springs front and rear with spring over front and rear flip would this make it ride much quieter and smoother . Or should i just go with a different frame from a 3/4 or 1 ton with engine trans and transfer case and stock axels from a doner truck . Basically just set my body on the complete lower frame and with all the parts from something like a 20oo and up . Im just so tired of all the clunk bang pop clunk rattle squeak of my truck . And i really hate no power steering and no auto transsion on and off road . I do like the stock axles and dont really have any issues with them and have custem made rims for them ( 16 x 12 ) from marsh with 39x16.5 pit bull rockers and dont want to change them . And for the 5.87 gears in the stock axles with the overdrive in the 700 r4 and the 39 in tires i think this will give me enough top end because i dont plain on going over 60 to 65 in this truck . And while im on here i just put in 2 new seats in the truck . I took out either gladiator or wagoneer seats that was in it . The seats that i put in was from the new mrap trucks and made by ggs and these are really great seats and are they heavy . They have a air ride shock in it and they can be un zipped and taken off the padding and washed this is after you take out a few bolts but they are very easy to get to and takeout . I put the black ones in but i think i will go with the tan ones because i bought a bunch of them . So if any one wants a set let me know .