Results 1 to 3 of 3

Thread: elohim1 : POR15 VS Sherwinn Williams 2part epoxy primer

  1. #1
    Join Date
    Dec 2006
    Location
    Oxford, Ohio 45056
    Posts
    175

    Default elohim1 : POR15 VS Sherwinn Williams 2part epoxy primer

    POR15 VS Sherwinn Williams 2part epoxy primer
    Post by elohim1 on Jun 28, 2006, 8:53pm

    Truck will be sand blasted tomorrow.

    I was going to Por15 the frame. Then Use the Sherwin Williams 2part epoxy primer and carc paint on the body. Everything is disassembled.

    Now I am considering just using the 2part primer and Carc green on the Whole truck. Just to make things simpler. The data sheet for the Primer says it has excellent corrosion resistance.

    Let me here your thoughts?

  2. #2
    Join Date
    Jan 2004
    Location
    Washington State
    Posts
    1,652

    Default fisherman :

    Re: POR15 VS Sherwinn Williams 2part epoxy primer
    Post by fisherman on Jun 28, 2006, 9:08pm

    Sounds fine to me. I will be using Hammerite on my frame. I will be scraping it. Use a crud thug, some hand cleaning with a wire brush. Pressure wash and then maybe brake clean or scrub down with lacquer thinner. Then 2 coats at least of Hammerite. If there is a little surface rust the Hammerite will bond better.

  3. #3

    Default devildog :

    Re: POR15 VS Sherwinn Williams 2part epoxy primer
    Post by devildog on Jun 29, 2006, 5:44am

    After working with a water cleanup epoxy base grout in kitchens I did some research on water clean up 2 part epoxy primer. Here are the links:

    http://www.epoxysystems.com/888.htm
    http://corporate.ppg.com/ppg/paf/doc.../aquaponwb.pdf

    http://www.benjaminmoore.com/tds/1033/TDSM43M44.pdf

    http://www.everestcoatings.com/datasheet....py%20Primer.pdf

    This would be an easier and healther epoxy to work with. Hope this helps.

Similar Threads

  1. Gillespie paint and primer
    By Kaiserjeeps in forum Stock Tech
    Replies: 10
    Last Post: November 20th, 2009, 11:43 AM
  2. Shot some primer today. (Pics)
    By fng in forum Open Discussion
    Replies: 11
    Last Post: June 16th, 2009, 07:38 AM
  3. Etching Primer
    By k8icu in forum Open Discussion
    Replies: 7
    Last Post: March 22nd, 2009, 01:34 PM
  4. Cleaning Prior to Paint or Primer
    By rboltz in forum Open Discussion
    Replies: 5
    Last Post: August 3rd, 2008, 01:22 PM
  5. Best all around primer?
    By Hammer in forum Open Discussion
    Replies: 21
    Last Post: April 17th, 2007, 10:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024