Results 1 to 10 of 13

Thread: 14 Bolt Backing Plate Conversion

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Jester Guest

    Default 14 Bolt Backing Plate Conversion

    When I swapped my NP200 out for a NP205, I lost the parking brake. I thought about putting all the NP200 drum parts onto the NP205 until I learned about the 14 Bolt backing plate conversion. The 14B has built in cable parking brakes. Others here have done it, so I started by tracking down the parts. There are different size brakes on the 14B so you need the 13" version.

    Lots of info here about the 14B axle and what vehicles they are found on:

    http://pirate4x4.com/tech/billavista...ble/index.html

  2. #2
    Jester Guest

    Default

    Stock:



  3. #3
    Jester Guest

    Default

    14B:




  4. #4
    Jester Guest

    Default

    To mount the 14B plate onto the stock D70 flange, the center hole needs to be made larger and the bolt holes moved slightly. Based on quick measurements, the hole needs to be about 2MM larger in diameter and the bolt holes need to be elongated about 1MM.

    Exact measurements to follow as I get into it further.

  5. #5
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    Great stuff here...already a sticky!
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  6. #6
    Jester Guest

    Default

    Might be helpful to others in tracking down the right backing plates.



    The ones I got are marked Bendix 324635 - L & R.

  7. #7
    Jester Guest

    Default

    14B plates with shoes are on the truck.



    Hubs and drums are next to go on. I need to work out the brake lines and the cables as well.

    The lines need to be adapted since the outlet on the cylinder is 3/16 vs 1/4 on the stock line. Also the new cylinders have the outlet in the center where the old ones were angled to the back. There is not much space between the back of the plate and the springs. Will need to see what will work. May need to bend up some new lines.

  8. #8
    Jester Guest

    Default

    Hubs and drums are back on the axle. Need to bend up some new lines and bleed the brakes then I will be back on the road.

    Still need to work out the parking brake cable but that can be done later.

  9. #9
    Join Date
    Jun 2007
    Location
    Alexandria KY
    Posts
    482

    Default

    Good work. Lokar offers cut-to-fit cable kits if requirements dictate something different.
    '67 M715 '42 GPW '45 MB

  10. #10

    Default

    theres cable kits out there a lot cheaper price wise than lokar. you cant tell them apart.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024