Results 1 to 8 of 8

Thread: Anyone switch to LEDS ?

  1. Default

    found these 24 volt LED Turn Signal,Taillight,Brake Lights and wondered if anyone had switched yet?
    http://www.etruckpart.com/24_volt_leds.htm
    1969 M715

  2. #2

    Default Anyone switch to LEDS ?

    tried the tail light this weekend. relly didnt see a change. save your money

  3. Default

    Bummer! I have them in my motorcycle and they make a world of difference.oh well.
    1969 M715

  4. #4
    Join Date
    Jan 2004
    Location
    Northern Colorado
    Posts
    324

    Default

    I have them both front and rear and they're great. (I have converted to 12v) They're sized right to fit in the mil style housing, too. Looks "correct", IMHO. People following you might think they're bright, however. If you have a 12V conversion, you'll need an electric flasher, as the LED's won't pull the amperage load needed to make a bi-metallic flasher work. Or you can just leave a regular bulb in series with the LED, but that sorta defeats the purpose of the low current draw LED light.

  5. #5

    Default

    The army has a Mil led composite light. They look like the "new" style composite, but are half the thickness. A friend of mine put them on a 1/4 ton trailer he was pulling with a tj. The good thing about them is that they work 12-48V. But they are expensive to buy. I would like to find 24V hallogine bulbs to put in my composite turn and tails now that would give some bright!
    Zone holster maker

  6. Default

    Koob-are yours 12 or 24 volt?
    1969 M715

  7. #7

    Default

    The military also has a heavy aluminum light housing that looks like our composite ones that houses and led system. I pulled a set off of my M1?? deuce trailer when I rewired it. Should be 24 Volt.
    Big Blocks RULE!

  8. #8
    Join Date
    Dec 2003
    Location
    San Antonio,Texas
    Posts
    43

    Default charging troubleshooting

    here is a good source of lights. also about half way through is a LED conversion kit.
    http://www.saturnsurplus.com/lights/lights.htm
    k
    67 M725 84 GW

Similar Threads

  1. Switch Assemblies?
    By Snuffy in forum Open Discussion
    Replies: 4
    Last Post: December 28th, 2008, 09:32 PM
  2. glove box switch
    By 14fan in forum Open Discussion
    Replies: 14
    Last Post: November 24th, 2008, 08:39 AM
  3. three lever switch
    By ryanroo in forum Stock Tech
    Replies: 3
    Last Post: March 20th, 2008, 12:47 PM
  4. 3-lever switch
    By tngreenmachine in forum Stock Tech
    Replies: 11
    Last Post: October 29th, 2007, 11:58 AM
  5. Ignition switch
    By Roger1952 in forum Stock Tech
    Replies: 4
    Last Post: March 18th, 2007, 07:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024