ForumsBasic TrainingOnline Maintenance ManualsThe M715 Zone Vin RegistryVPW's M715 Parts ListGalleriesLinks

Go Back   M715 Zone > General Tech > Stock Tech > Stock Tech Archives

Stock Tech Archives Look here first for all archived messages

 
 
Thread Tools Display Modes
  #1  
Old May 31st, 2007, 07:46 AM
brute4c's Avatar
brute4c brute4c is offline
Grand Poobah
 
Join Date: Sep 1998
Location: North Central Wisconsin
Posts: 11,194
brute4c is a Soldier
Default Stock specs for stock axle, wheel, brake drums & tires

The stock front axle is a closed knuckle full floating Dana 60. It has 30 spline axles. It comes with an open differential, ie NO locker or posi. It has a WMS to WMS (wheel mounting surface to wheel mounting surface) measurement of 73.5 inches.

The stock rear axle is a Dana 70 full floater. It has 23 splines. It comes with an open differential, ie NO locker or posi. It has a WMS to WMS measurement of 72.5 inches.

The bolt pattern for the wheels is 6 on 7.25 inches with a 5.5 inch center hole. The stock studs are 5/8ths inch diameter with 18 threads per inch, fine thread. The stock rims are split safety ring type, not split rims, that measure 16 inches tall, 6.5 inches wide and have 5.5 inches of backspacing.

The brake drums are 13 inches in diameter and use a 2.5 inch wide pad. A new brake drums machined surface is 13.030 inch in diameter. The Maximum Allowable Drum Diameter is 13.060 inch. The manual says that, "If a drum is reconditioned in this manner, either the correct factory-supplied, oversize lining .030" must be installed, or a shim equal in thickness to the metal removed must be placed between the lining and shoe so that the arc of the lining will be the same as that of the drum".

The stock military tires are a 9.00-16 NDT (Non Directional Tread) which run approx. 34 inches tall.

The track of the M715, center of tread to center of opposite tires tread, is 67 inches.

The widest point of the M715 is 85 inches at the lifting hub mounted on the rear axle flange.

The max width of the tires on the truck is just under 80 inches in case you need to know for trailering purposes.

Last edited by brute4c; February 3rd, 2012 at 07:30 AM.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
m725kid19 : stock tires? PseudoZone PseudoZone - Stock Tech Archive 18 December 15th, 2009 01:17 PM
stock wheel cylinder Chef Stock Tech 2 September 30th, 2008 07:54 AM
Stock axle? green goat Open Discussion 2 March 14th, 2008 02:23 PM
Stock Wheel TIRE Survey Nuke_Danarchy Open Discussion Archives 5 February 23rd, 2004 07:18 PM


All times are GMT -7. The time now is 04:37 AM.

 

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
1998 - 2018


This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c
If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com

Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC.

Written permission can only be obtained by contacting
brute4c@m715zone.com

Copyright 1998-2018