Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: alex : Parking brake

  1. #1

    Default alex : Parking brake

    Parking brake
    Post by alex on Dec 19, 2006, 8:23pm

    Hey guys could any of you give me some info on how did the parking brake came in the original m715.
    when i bought mine it didnt have one and i want to know where does ti go in the stock one.

    thanks.

  2. #2
    Join Date
    Mar 2004
    Location
    northern Arizona
    Posts
    1,025

    Default compexp :

    Re: Parking brake
    Post by compexp on Dec 19, 2006, 8:42pm

    It's a drum-mounted brake that attaches to the rear of the transfer case on the driver's side. If you're asking about the lever, it's a large lever with a button on top that sticks up to the left of the xfer case levers.

    Jon, do you have a pic you can post?

  3. #3

    Default gimpyrobb :

    Re: Parking brake
    Post by gimpyrobb on Dec 19, 2006, 9:19pm

    If you have everything else, I have an extra parking brake lever that Rich was talking about. LMK.

  4. #4

    Default alex :

    Re: Parking brake
    Post by alex on Dec 20, 2006, 1:55pm

    I don?t have the lever, and i?m going to see about everything else...
    if anyone has a picture of the mechanism that will help ...!!!

    thanks...

  5. #5
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,519

    Default brute4c :

    Re: Parking brake
    Post by brute4c on Dec 20, 2006, 2:17pm

    Hmmm....what do you need pics of....the stuff on the tcase and the lever and the linkage?

    Heres some to get started:

    Lever and linkage mounted to passenger side of the transmission:


    not the best quality, but here is a shot of the tcase with the ebrake installed on it:


    Exploded view of the ebrake parts:


    View showing parking brake lever, with arrow, and other shift levers in relation:

  6. #6
    Join Date
    Jan 2004
    Location
    Geneva, FL
    Posts
    731
    Blog Entries
    1

    Default teking :

    Re: Parking brake
    Post by teking on Dec 20, 2006, 2:28pm


    Quote:
    Hey guys could any of you give me some info on how did the parking brake came in the original m715.
    when i bought mine it didnt have one and i want to know where does ti go in the stock one.

    thanks.



  7. #7
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,519

    Default brute4c :

    Re: Parking brake
    Post by brute4c on Dec 20, 2006, 4:15pm

    The pic teking shows above is the stock ebrake with a conversion flange to allow the rear driveshaft to run off the same output as the ebrake. This eliminates the very loud whine at speed that the stock tcase has but it isnt a stock item....normally the rear driveshaft is on the passenger side output with the ebrake on the drivers side one.

  8. #8

    Default sstransky :

    Re: Parking brake
    Post by sstransky on Dec 20, 2006, 5:28pm

    Why does the drive shaft in stock form come off the right side shaft, what capability do you lose if any by connecting to center shaft.

  9. #9
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,519

    Default brute4c :

    Re: Parking brake
    Post by brute4c on Dec 20, 2006, 5:49pm

    Why it comes that way I dont know....
    I do know that there is no functionality lost...I have had mine that way since 1999 and many many others have their converted too with no problems....you still get high range, low range, 2 and 4 wheel drive as before...no difference at all....except it does cut noise as noted above...from a ton at highway speed to NONE...and some say it lowers their t-case temps...

  10. #10
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default binfordm715 :

    Re: Parking brake
    Post by binfordm715 on Dec 20, 2006, 11:59pm


    Quote:
    Why does the drive shaft in stock form come off the right side shaft, what capability do you lose if any by connecting to center shaft.

    The only downside to moving it that I have ever heard was a clearance issue with the stock gas tank when the rear axle is swapped out for, say, a Chevy 14-bolt. The stock axle has the differential offset to the passenger side a bit, so it is not an issue unless you swap in a rear axle with the differential centered. It may have even fit (barely). Haven't done it myself though.

    I think the benefits would easily outweigh the drawbacks though.

Similar Threads

  1. disc parking brake
    By osut362 in forum Modified Tech
    Replies: 10
    Last Post: May 11th, 2011, 01:30 PM
  2. luckypabst : Parking brake question
    By LuckyPabst in forum PseudoZone - Open Archive
    Replies: 8
    Last Post: November 11th, 2009, 04:33 AM
  3. NP205 Parking Brake
    By Jester in forum Modified Tech
    Replies: 7
    Last Post: January 16th, 2009, 02:32 PM
  4. Parking Brake Specs
    By Jester in forum Stock Tech
    Replies: 4
    Last Post: September 9th, 2008, 12:06 PM
  5. Hydro parking brake
    By Brian Sisson in forum Modified Tech Archives
    Replies: 15
    Last Post: January 2nd, 2004, 02:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024