Hi all...

My driver's side door sags about 1/2" or maybe a bit more. Parts on the door near the latch are becoming worn. I am not sure how to approach this repair/replace.

This is what I have done so far to address it:

1. I loosened the 2 outside bolts on the cab side, while supporting the door with a floor jack and a 2bee-four. Adjustment of those bolts had no effect whatsoever.

There's a bolt way back inside the hinge on the cab side that holds the hinge to the cab or to the left front quarter panel, but I didn't want to go loosening bolts willy-nilly without first asking the experts on this site. The parts diagram in the manuals offer little help.

I think the hinge is likely worn.

Yes, I searched the forum, but I only found Brute4c's Dodge hinge pin thread from 2011.

How can I address this? Any insight or assistance would certainly be helpful.

With gratitude...
Brian