ForumsBasic TrainingOnline Maintenance ManualsThe M715 Zone Vin RegistryVPW's M715 Parts ListGalleriesLinks

Go Back   M715 Zone > General Tech > Open Discussion

Open Discussion Open Discussion for all M715 series trucks

Reply
 
Thread Tools Display Modes
  #1  
Old February 5th, 2011, 05:39 PM
Jester
Guest
 
Posts: n/a
Default 14 Bolt Backing Plate Conversion

When I swapped my NP200 out for a NP205, I lost the parking brake. I thought about putting all the NP200 drum parts onto the NP205 until I learned about the 14 Bolt backing plate conversion. The 14B has built in cable parking brakes. Others here have done it, so I started by tracking down the parts. There are different size brakes on the 14B so you need the 13" version.

Lots of info here about the 14B axle and what vehicles they are found on:

http://pirate4x4.com/tech/billavista...ble/index.html
Reply With Quote
  #2  
Old February 5th, 2011, 05:41 PM
Jester
Guest
 
Posts: n/a
Default

Stock:


Reply With Quote
  #3  
Old February 5th, 2011, 05:41 PM
Jester
Guest
 
Posts: n/a
Default

14B:



Reply With Quote
  #4  
Old February 5th, 2011, 05:45 PM
Jester
Guest
 
Posts: n/a
Default

To mount the 14B plate onto the stock D70 flange, the center hole needs to be made larger and the bolt holes moved slightly. Based on quick measurements, the hole needs to be about 2MM larger in diameter and the bolt holes need to be elongated about 1MM.

Exact measurements to follow as I get into it further.
Reply With Quote
  #5  
Old February 6th, 2011, 05:04 AM
brute4c's Avatar
brute4c brute4c is offline
Grand Poobah
 
Join Date: Sep 1998
Location: North Central Wisconsin
Posts: 11,295
brute4c is a Soldier
Default

Great stuff here...already a sticky!
__________________
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

Pro-choice, that's a LIE, babies don't choose to die!!
Reply With Quote
  #6  
Old February 6th, 2011, 10:51 AM
Jester
Guest
 
Posts: n/a
Default

Might be helpful to others in tracking down the right backing plates.



The ones I got are marked Bendix 324635 - L & R.
Reply With Quote
  #7  
Old February 9th, 2011, 07:49 PM
Jester
Guest
 
Posts: n/a
Default

A few measurements. Your results may very.



A: From outside edge of bolt holes (both have 1/2" bolt holes)

Stock D70 - 5.29"
14B - 5.17"

B: Diameter of center hole

Stock D70 - 3.89"
14B - 3.80"
Reply With Quote
  #8  
Old February 9th, 2011, 10:39 PM
Binford's Avatar
Binford Binford is offline
Moderator

 
Join Date: Oct 2006
Location: Port Orchard, Wash.
Posts: 4,744
Binford is a Soldier
Default

Thanks, Jester!
__________________
-- Tim Taylor

Reply With Quote
  #9  
Old February 10th, 2011, 07:51 PM
Jester
Guest
 
Posts: n/a
Default They fit

2 hours & a carbide die-grander bit in my electric drill later, the backing plates fit. It's not machine shop precision but they fit and are not too ugly.

Basically ground out the center hole and elongated the bolt holes a bit. Did not take pics cause you really can't see much difference.

Next is to put new wheel cylinders on and reassemble the shoes. Need to go thru the 4 different cables I have as well to decide which two will work best.

Stay tuned.
Reply With Quote
  #10  
Old February 21st, 2011, 03:42 PM
Jester
Guest
 
Posts: n/a
Default

14B plates with shoes are on the truck.



Hubs and drums are next to go on. I need to work out the brake lines and the cables as well.

The lines need to be adapted since the outlet on the cylinder is 3/16 vs 1/4 on the stock line. Also the new cylinders have the outlet in the center where the old ones were angled to the back. There is not much space between the back of the plate and the springs. Will need to see what will work. May need to bend up some new lines.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 05:49 AM.

 

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
1998 - 2018


This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c
If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com

Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC.

Written permission can only be obtained by contacting
brute4c@m715zone.com

Copyright 1998-2018