Results 1 to 10 of 15

Thread: Freeze Plug Leaking

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Freeze Plug Leaking

    Have a slight problem. I got my rig running nice and smooth only to have a freeze plug second to the rear on the drivers side start leaking. Being new to the M715 are these carried at napa or am I going to have to seek them else where? Also is there anything special l need to know or do in fixing this problem?

  2. #2
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    Cant remember someone having to change one of these except for when rebuilding an engine...dont think they are anything special to change...

    Taking out out and going to the parts store with it...or a real good measurement of the hole it came out of...should get you one.
    Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.

    Pro-choice, that's a LIE, babies don't choose to die!!

  3. #3
    Join Date
    Jan 2011
    Location
    Fernandina Beach, FL
    Posts
    3,689

    Default

    I got freeze plugs for the Braden LU-4 winch from O'Reilly. I went on their website and did a search. It found the correct size and it was a whopping 35¢!

    They had to order it but it was in stock within two days. It helps the guys at the counter if you have looked up the Dorman number.

    Try this:

    http://www.oreillyauto.com/site/c/se...tor&vi=5186827

  4. #4

    Default

    use a good sealer when you reinstall the freeze plug,clean the block sealing surface real good to bare metal, use a socket that will just fit inside the freeze plug as a tool to install it, use a 3lb hammer as a driver.if you use a brass plug you wont have to paint it. AND go real slow or you,ll drive it in too far.

  5. #5
    Join Date
    Jan 2011
    Location
    Fernandina Beach, FL
    Posts
    3,689

    Default

    Quote Originally Posted by md1970 View Post
    use a good sealer when you reinstall the freeze plug,clean the block sealing surface real good to bare metal, use a socket that will just fit inside the freeze plug as a tool to install it, use a 3lb hammer as a driver.if you use a brass plug you wont have to paint it. AND go real slow or you,ll drive it in too far.
    Excellent advice. I hope I NEVER have to deal with a freeze plug. So far, the coolant in my engine looks good, absolutely no hint of rust. (Wish I could say that about the brake lines !)

  6. #6
    Join Date
    Sep 2012
    Location
    Anchorage, AK
    Posts
    414

    Default

    Quote Originally Posted by md1970 View Post
    use a good sealer when you reinstall the freeze plug,clean the block sealing surface real good to bare metal,
    Permatex RightStuff. I LOVE that goop!

    I used it on a diff cover a while back- scraped, scotchbrite, and wipe with acetone beforehand. The next time I had to open the diff, it wouldn't pry off. I eventually lifted the front end of the truck with a jack on the lip of the diff cover, then hammered a thin scraper under the edge.

  7. #7

    Default

    I use indian head sealer for almost 40 yrs and 0 problems.

  8. #8

    Default

    can anyone tell me if you can tap back in an expansion plug in the head itself? its located on the head up underneath back drivers side above the started

  9. #9

    Default

    Quote Originally Posted by Ol Sarge View Post
    can anyone tell me if you can tap back in an expansion plug in the head itself? its located on the head up underneath back drivers side above the started

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024