I bought this M726 just for the winch setup. On the drivers side of the winch it has a small vent tube that has been leaking the gear oil. I don't know where to start. Maybe its just sad. Thanks in advance. Lanny
I bought this M726 just for the winch setup. On the drivers side of the winch it has a small vent tube that has been leaking the gear oil. I don't know where to start. Maybe its just sad. Thanks in advance. Lanny
I will have to look on the LU4 in my class tomorrow. But, if it is leaking out a vent on top, I would suspect water or a waaay over full winch.
If it is leaking out the seals, just drain and fill with John Deere cornhead grease.
Remember if you didn't build it you can't call it yours.
6.2 powered M715, 5 M1009's, M416, 2 M101's, 2 M105's, 3 M35's, M1007 6.5 turbo Suburban project called Cowdog.
https://www.youtube.com/channel/UCCz...HGkBCfhXZ5iuaw
What Barrman said......
And even if you go to the expense and time of resealing it, it won't be a question of if it will leak, but when it will leak. Pack it full of grease. At least that doesn't leave a puddle all over your driveway, shop or garage.
"Free advice is worth what you pay for it."™
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |