is there one?
Honda bond?? form a gasket?? make your own?:
leaking like a sieve
NO one seems to have one, on line or in person except a 300.00 complete gasket kit
is there one?
Honda bond?? form a gasket?? make your own?:
leaking like a sieve
NO one seems to have one, on line or in person except a 300.00 complete gasket kit
Last edited by Ray Conley; August 26th, 2016 at 11:47 PM.
My dad used to have a tiny ball pein hammer with which he used to make gaskets. He'd simply hold the paper on the surface requiring the gasket, and lightly tap around the edges of the surface with the ball face of the hammer, thus cutting out the new gasket. Trick, and quick, which made that hammer STRICTLY off-limits to a frequently careless little kid.
so the answer is.....ba da da da da da (that's a drum roll)
make one..
thank you all for the input...
Tap out a couple of the bolt holes first,then drop a bolt in the holes. Keeps the gasket material from sliding ,and attitude more positive.
DaveJ
Its very common practice to use the ball peen hammer. I have the same very small one you speak of, affectionately referred to as "baby hammer"
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |