Results 1 to 8 of 8

Thread: ron : NP{200 Transfer Case

  1. #1

    Default ron : NP{200 Transfer Case

    NP{200 Transfer Case
    Post by ron on Aug 8, 2006, 7:22am

    Transfer case assembled, quick question: What type of oil do you guys use??

  2. #2
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default barrman :

    Re: NP{200 Transfer Case
    Post by barrman on Aug 8, 2006, 7:45am

    90W is what is called for.

    I ran 80W-130 mineral and then switched to Mobile 1 synthetic of about the same weight.

  3. #3

    Default ron :

    Re: NP{200 Transfer Case
    Post by ron on Aug 8, 2006, 9:17am

    why did u switch to synthetic?

  4. #4
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default barrman :

    Re: NP{200 Transfer Case
    Post by barrman on Aug 8, 2006, 11:13am

    I was foolishly thinking that synthetic would run cooler and not allow the t-case to heat up. I can almost set my watch by the t-case heat. 45-50+ mph for 45 minutes="what is that smell?" followed by "have I really been driving for 45 minutes and only gone this far?" That is with no top on the truck. With the top on, my eyes start to water too. I used to stop and check the case temp with my infrared thermometer. Readings of 240-278 degrees were what I always got. Slowing to 45 mph would keep it between 240-245 degrees. That is why I am switching to a NP205. Of course, by the time I get that done, I won't be able to afford the fuel to drive faster than 45 mph even if I can.

  5. #5

    Default robertcowan :

    Re: NP{200 Transfer Case
    Post by robertcowan on Aug 8, 2006, 11:24am

    I USE 85W140 AMSOIL. DEFINATLY DROPS TEMPS.

  6. #6
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default brute4c :

    Re: NP{200 Transfer Case
    Post by brute4c on Aug 8, 2006, 2:55pm

    Doesnt help my temps Bob...some tcases just dont respond that way...

  7. #7
    Join Date
    Dec 2003
    Location
    Giddings, Texas
    Posts
    7,729

    Default barrman :

    Re: NP{200 Transfer Case
    Post by barrman on Aug 8, 2006, 3:10pm

    Jon,
    To be fair to Bob. The highest I ever got with mineral oil was 278 degrees. The highest I have ever had with synthetic is 264. I just run at 50 and don't worry about it anymore.

  8. #8
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default brute4c :

    Re: NP{200 Transfer Case
    Post by brute4c on Aug 8, 2006, 3:17pm

    I have exceeded the gauges limit of 320 degrees with both....with the synthetic, I ran for bout an hour at 60 and also at 55 and reached about 240 degrees....then within 1/4 mile the temp rose dramatically to 280 and I managed to get off the road and stop....it pegged past the 320 line and I had to wait an hour or more for it to come down to the point where I could drive again...

    I do 50 on the flats and downhills....I let the truck slow down on uphills by not steping into it more than I was on flat ground at 50....that worked from LBL in Kentucky to northern Wisconsin without overheating in the heat of summer.

Similar Threads

  1. transfer case ?
    By d4colombo in forum Modified Tech
    Replies: 31
    Last Post: September 11th, 2012, 10:01 AM
  2. Replies: 10
    Last Post: November 29th, 2008, 08:33 PM
  3. Flipped 208 transfer case
    By tonka in forum Modified Tech
    Replies: 5
    Last Post: July 11th, 2008, 04:19 PM
  4. tires & transfer case
    By xironworker in forum Open Discussion
    Replies: 16
    Last Post: January 7th, 2008, 10:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024