No sweat...and as soon as we get the FAQ setup the way we want it, we will be posting this and other info there...its working...
The bolts are 7/16th FINE thread...make sure to tap the holes, just to be safe, and use grade 8 bolts for strength.
The lengths are different for the 2 bolts, I used a micrometer to measure down from the cab...I really am not in the mood to try and untorque mine right now to measure them, but it seems they varied from around 2 inch to 3 1/2 inch or so for the inner ones...the outer ones are quite short and if I remember right, are both the same length as each other...like an inch or so...just make sure you have enough room to go through the nut a couple turns...at least 1 full but 2 is better...
I'll look on the old board we had on this site and see if I can find anything on the lengths...
brute4c
Lord send your Holy Ghost into our hearts and make the desire of our hearts Your Will.
Pro-choice, that's a LIE, babies don't choose to die!!